The DCP-AMS are the Hochiki America series of addressable manual pull stations that provide a fast and
practical means of manually initiating a fire alarm signal. Both single action and dual action manual pull stations
are available. Resetting of the pull station requires either a Cat 211 key or a 1/8" hex key (depending upon the
model used).
An alarm condition is actuated by pulling down on the handle of the DCP-AMS and DCP-AMS-KL single action
models. On the dual action models DCP-AMS-LP and DCP-AMS-KL-LP the Lift and Pull cover must be lifted
before pulling down on the pull station handle. Once the pull station is activated, the handle cannot be put
back into a normal standby condition without using the key operated reset feature.
The DCP-AMS series is electronically addressable and includes a bi-colored status LED. The LED blinks green
indicating normal communication with the DCP compatible SLC loop. When an alarm condition is
actuated by pulling the handle, the LED will latch Red to indicate the alarm condition.